Blackbox-VHF-Recorder-mod1

Could you be lost for words if your vessel was involved in a serious incident? Find out more here...

VDR RegulationsVDR regulations are changing in July 2014. Could replacing equipment now save you major investment later? Find out here...

Blue Chip Bridge Electronics REpair and Maintennace ServicesBlue Chip Worldwide Bridge Electronics Repair and Maintenance Services. For more about annual contracts, click here...

VSAT  Satellite Communications Solutions
Does your fleet have the best options available for VSAT communications? Find out here...

Furuno ARPA - X-Band and S-Band Radars

 

Reliable performance, with improved target detection and user interface capability.


The FAR: 21x7/28x7 Series of Radar from Furuno meets the IMO and IEC's latest performance requirements. This series of radars also meet the requirements for ships below 10,000 gt.


Furuno's design is aimed at providing radar systems, which meet the ever increasing demands for efficient ship management. DVI (Digital Video Interface) provides a sharp, crisp and clear display and advanced, fast signal processing enhances the target detection.


AIS data can be incorporated on screen, when interfaced with an AIS Transponder and Receiver to give the operator a better perspective and greater awareness of the ship's situation.


The system's advanced navigational accuracy increases operation efficiency and improves safety.
 

 

   
Antenna Selection - FAR-21x7-28x7 Series


FAR:2117/2817    X-band 12 kW - TR up
FAR:2127/2827    X-band 25 kW - TR up
FAR:2827W         X-band 25 kW - TR down
FAR:28137S/2837S    S-band 30 kW - TR up
FAR:2837SW    S-band 30 kW - TR down

X-Band FAR: 2117-2817-2127-2827-2827W

 

S-Band FAR: 2137S/2837S/2837SW

   
Networked System - 100 Base-TX Ethernet



Up to as many as four FAR-21x7/28x7 series radar units with FEA-2107/2807 ECDIS can be linked to share navigational data across units within the network. This stable, high speed network capability provides a choice from a single station up to a complete Integrated Navigational System.
 

 

   
Target Tracking(TT: ARPA)/AIS



Complete Target Tracking capability, plotting up to 100 targets and displaying up to 1000 AIS targets from the AIS transponder. Detailed information can be shown in cells to the right of the screen, with the AIS Target Tracking scheme giving the operator full control.




An AIS symbol is shown if it is a normal, sleeping, selected, dangerous or lost target.
 
   
Fusion - Target Association



Identification of targets can be made by both TT and AIS and can be shown with two respective symbols, made possible because the position of the AIS is measured by a GPS navigator, in L/L. TT targets are calculated by range and bearing and the TT symbols merge with the AIS symbols, provided each symbol is in the set criteria. This is determined by the varying range, bearing, speed and course, as well as other data.
 
   

ARPA Target Tracking/AIS Data Display

 

ARPA target data, displayed in information cells, includes:

  • Bearing
  • Range
  • Course
  • Speed
  • Closest Point of Approach
  • Time to Closest Point of Approach
  • Bow Crossing Range and Bow Crossing Time.
 
   
AIS target data, displayed in information cells, includes:
  • AIS target name
  • Bearing    
  • Range
  • Course
  • Speed
  • Closest Point of Approach
  • Time to Closest Point of Approach
  • Bow Crossing Range
  • Bow Crossing Time
  • Heading Rate of Turn
  • Call sign and MMSI number
 
   

Guard Zones



Automatic Acquisition Zones



Two auto-acquisition zones can be set in any sector and in any form. Auto-acquisition zones suppress areas and by disabling automatic acquisition and tracking outside of these areas clutter and unnecessary processor overload are avoided.



Targets are displayed within the auto-acquisition zone as an inverse triangle. There is no restriction on the operator to manually acquire important zone information to assess teh situation.



Guard and Anchor Watch Zones



Visual and automatic alarms are generated if targets enter zones set by the operator. A Guard Zone can be set as an anchor watch so as to alert the operator if the ship or targets drift out of the watch zone.


CPA Alarm


The target tracking symbol becomes triangular when a predicted course violates the operator's set CPA/TCPA, alerting the operator of approaching targets for collision avoidance. Vector lengths can be changed to evaluate target movement and trends.

 
   
Target Tracking Trails



Target trails generate a graduated shading trail on all displayed tracking targets and echo trails are shown in relative or true motion. True trail is only shown on TM and relative trails displayed on movement between targets and ships.
True motion trails are only visible from a gyrocompass signal and the speed of the ship input so as to cancel the vessel's movement and current target movements in relationship to their own over-the-ground speed or course.
 
   
Radar Map



Lines and marks combine to define the radar map and the input of monitoring information of navigation route plan and area. As many as 20,000 Points can be included in the radar map and all its data saved and repeated for use on regular routes. When networked with ECDIS the radar's planned routes may be applied to the radar display.
 
   
Ergonomic Layout - stress-free operation




The control unit's logical layout and arrangement is such that the application of key and trackball give the operator an organised menu, ensuring all operations and functions may be controlled from the trackball.
versatile control units
Full keyboard control head



Trackball control head



Trackball provides an alternative to the keyboard. It can be used as a remote control and placed in easy reach of the captain's seat.
 

 

Back to top...

Follow Us